Hydraulic Filtration

Contaminants

Without a filter: what hydraulic oil carries

In hydraulic valves, the clearance between spool and body is very narrow. A hard particle that enters this gap wears the spool or makes it stick.

Wear particles

Fragments shed from metal surfaces in pumps, valves and cylinders.

Dirt from outside

Dust entering through the cylinder rod and the tank breather.

Dirt introduced during maintenance

Particles that enter the circuit when oil is topped up or a hose is replaced.

Oil degradation products

Sludge and varnish formed by heat and oxidation.

If the filter does not hold this dirt, valves stick or leak, pump efficiency drops and cylinder seals wear.

Operating principle

How it works: from the tank to the cylinder and back

Hydraulic circuit diagram: tank, pump, directional control valve and cylinder; contaminated return line and clean line. M B B 1 2 3
  1. Contaminated return line

    Oil returning from the cylinder and valve carries particles generated in the circuit and dirt that has entered from outside.

  2. Hydraulic filters

    The hydraulic filter holds the particles circulating in the circuit.

  3. Clean line

    Clean oil flows from the tank to the pump, and from there to the valves and cylinders.

The valve that keeps oil flowing

By-pass valve

Opens when the filter is full or when operating with cold, thick oil. The circuit is never starved of oil, but at that moment the oil passes unfiltered.

Whether a model has a by-pass valve, and its opening pressure, is listed in the technical table on every product page in the catalog.

Product types

Ferra product types for the hydraulic circuit

Hydraulic filters use the same prefixes as oil filters: the prefix shows the construction type, and the H at the end of the Ferra No marks a hydraulic filter.

Hydraulic filter construction types and product counts
TypePrefix
Spin-on oil filterFSO
Element-type oil filterFEO
Eco oil filterFCO

The right filter

Finding the right filter

The right hydraulic filter is found by number or by machine; visual similarity is not enough. Two filters that look alike can differ in thread size or by-pass opening pressure.

FAQ

Frequently asked questions

I have another brand's hydraulic filter number. How do I find the Ferra equivalent?

Enter the number in the cross-reference search, with or without spaces.

What does the H at the end of the Ferra No mean?

That the filter is a hydraulic filter. Hydraulic filters use the same prefixes as oil filters (FSO, FEO, FCO); the H tells them apart.

When should a hydraulic filter be changed?

Follow the machine or vehicle manufacturer's maintenance schedule.

Is the circuit damaged when the by-pass valve opens?

The valve protects the circuit from oil starvation. However, the oil is not filtered during that time; a valve that stays open constantly indicates the filter is past its change interval.

In which vehicles are hydraulic filters used?

Construction and agricultural machinery, as well as trucks and buses.

Start working with Ferra Filter

Cookie Preferences

Essential cookies are always active to keep the site running correctly. We only use analytics and marketing cookies with your explicit consent.