Fuel System Filtration
Contaminants
Without a filter: what the fuel carries
Fuel picks up contamination in the tank and during refuelling. Modern injection systems work with tight clearances; hard particles and water that enter these clearances cause wear.
Dust and sediment
Particles that enter during refuelling or through the tank vent and settle at the bottom of the tank.
Rust and metal particles
Particles shed by the tank, lines and pump.
Water
Water that condenses in the tank or arrives with the fuel. It impairs the lubrication of injection components and causes corrosion.
If the filter does not stop these contaminants, the result is gradual wear: the injector spray pattern deteriorates, and the pump and injectors wear out early.
Operating principle
How it works: from tank to injector
Contaminated fuel
The feed pump draws fuel from the tank and sends it to the filter.
Filter and water separator
Fuel passes through the filter media; particles are retained in the media. In models with a drain tap, water that collects at the bottom of the filter is drained through the tap.
Clean fuel
Clean fuel flows on to the high-pressure pump and the injectors.
The connection at the bottom of the filter
Drain tap and sensor port
Some spin-on fuel filters have a drain tap at the bottom, and some also have a port for a sensor.
Whether a model has a bottom connection is shown in the technical table on every product page in the catalog.
Product types
Ferra product types for the fuel system
The first three letters of the Ferra No indicate the filter's construction type.
| Type | Prefix | Construction |
|---|---|---|
| Spin-on fuel filter | FSF | Replaced as one piece together with its housing. |
| In-line fuel filter | FSB | Fitted into the fuel line with pipe connections. |
| Element-type fuel filter | FEF | Replaceable element fitted into a permanent housing. |
| Eco-type fuel filter | FCF | Eco-type element fitted into a permanent housing. |
The right filter
Finding the right filter
The right fuel filter is found from the vehicle or from a part number; visual similarity is not enough. Two filters that look alike can differ in connection thread, gasket diameter or bottom connection.
Quality and testing
Standard, testing and production
Product standard
Our fuel filters hold TS 5395 certification.
Multi-pass efficiency test
In our laboratory, the filtration efficiency and contaminant retention capacity of fuel filters are measured. The test is repeated on samples taken as production reaches set quantities.
Production
Pressing, painting, paper pleating, assembly and end-of-line inspection take place in the same plant, within the IATF 16949 automotive quality management system.
FAQ
Frequently asked questions
I have the vehicle's original part number. How do I find the Ferra equivalent?
Enter the number in the cross-reference search, with or without spaces.
Can I choose between a spin-on filter and an element type?
No. The type is determined by the engine's filter mounting. Use the type the catalog shows for your vehicle.
How can I tell whether my filter has a drain tap?
If the technical table on the product's catalog page lists a bottom connection thread (J), the filter has a drain or sensor connection at the bottom.
In which vehicle segments are fuel filters available?
Passenger cars and light commercial vehicles, trucks and buses, and construction and agricultural machinery.
Related Pages
Fuel Filters
Fuel filters play a critical role in keeping your engine running efficiently.
Laboratory
From raw-material intake to finished product, our modern laboratory runs comprehensive control, process and performance tests.
Solutions
From engine protection to industrial hydraulic systems, Ferra Filter covers every major filtration application with oil, fuel, air, cabin, hydraulic and HEPA filters.