Lubrication System Filtration

Contaminants

Without a filter: what the oil carries

Oil forms a film only microns thick between moving parts. Any hard particle larger than that film acts as an abrasive between two metal surfaces.

Metal wear particles

Fragments worn from piston rings, cylinder liners and bearings.

Soot

Carbon that passes from the combustion chamber into the crankcase, especially in diesel engines.

Dust

Silica that escapes the air intake or enters during maintenance.

Oil degradation products

Sludge and varnish formed by heat and oxidation.

If the filter does not hold these contaminants, the result is progressive wear: bearing clearances open up, oil pressure drops and turbocharger bearings fail early.

Operating principle

How it works: from the pump to the oil gallery

Cutaway of a spin-on oil filter: contaminated oil passes through the filter media and clean oil flows to the engine's lubrication circuit. B B 1 2 3
  1. Contaminated oil

    The oil pump draws oil from the sump and pushes it into the filter.

  2. Filter media

    Oil passes through the filter media from the outside in; particles stay in the pleated media.

  3. Clean oil

    Clean oil flows through the filter's centre tube into the engine's main oil gallery.

Two valves that safeguard the flow

By-pass valve

Opens at a cold start with thick oil, or when the filter is full. The engine is never starved of oil, but at that moment the oil passes unfiltered. That is why the change interval should not be exceeded.

Anti-drain valve

Prevents the filter from draining when the engine stops, so oil reaches the oil gallery quickly in the first seconds after start-up.

Which valves each model has, and its by-pass opening pressure, are listed in the technical table on every product page in the catalog.

Product types

Ferra product types for engine lubrication

The first three letters of the Ferra No indicate the filter's construction type.

Oil filter construction types and product counts
TypePrefixConstruction
Spin-on oil filterFSOReplaced as one piece together with its housing.
Element-type oil filterFEOReplaceable element fitted into a permanent housing on the engine.
Eco-type oil filterFCOEco-type element fitted into a permanent housing.
Centrifugal oil filterFSOCentrifuge rotor cartridge.

The right filter

Finding the right filter

The right oil filter is found from the vehicle or from a part number; visual similarity is not enough. Two filters that look alike can differ in thread size, gasket diameter or valve opening pressure.

FAQ

Frequently asked questions

I have another brand's filter number. How do I find the Ferra equivalent?

Enter the number in the cross-reference search, with or without spaces.

Can I choose between a spin-on filter and an element type?

No. The type is determined by the engine's filter mounting. Use the type the catalog shows for your vehicle.

When should the oil filter be changed?

At the service interval set by the vehicle manufacturer. Filters are designed for this service life. If a malfunction or contamination of the oil fills the filter early, it should be changed without waiting for the service date.

Does the engine suffer damage when the by-pass valve opens?

The valve protects the engine from oil starvation. However, the oil is not filtered during that time; a valve that stays open constantly indicates the filter is past its change interval.

In which vehicle segments are oil filters available?

Passenger cars and light commercial vehicles, trucks and buses, construction and agricultural machinery, and motorcycles.

Start working with Ferra Filter

Cookie Preferences

Essential cookies are always active to keep the site running correctly. We only use analytics and marketing cookies with your explicit consent.